ThingConnect

FTP on CNC machines

How FTP sends, receives and backs up NC programs, which controls have it, and how a control like Brother's CNC-C00 is monitored over it.

What FTP is

FTP (File Transfer Protocol) is one of the oldest and simplest ways to move files between devices on a network. A device runs an FTP server; another connects as a client, logs in, and downloads or uploads files.

On CNC machines, FTP's everyday job is moving NC programs: sending them from a PC or CAM system to the machine, pulling them back, and backing them up, without a USB stick or an RS-232 cable.

  • Sending programs

    In practice
    Upload a program (for example PART001.NC) from the programming PC to the machine
  • Receiving programs

    In practice
    Download a program edited at the machine back to the PC
  • Backing up

    In practice
    Copy every program off the control before a repair or a control swap
  • Sharing between machines

    In practice
    Move the same program to several machines from one place
  • DNC software

    In practice
    Many DNC packages use FTP to reach network-capable controls

How FTP works on a CNC

FTP client

PC or CAM

FTP client

ThingConnect gateway

↓ port 21 · login + commands ↓

FTP server · CNC control

  • NC programs · send, receive, back up
  • Live status files · some controls, such as Brother CNC-C00
  1. 1The CNC control and the PC are connected to the same network, each with its own IP address.
  2. 2The FTP client on the PC connects to the control on port 21 and logs in with the user name and password set on the control.
  3. 3The client lists the control's folders and picks a file.
  4. 4The file is uploaded to the machine or downloaded to the PC over a separate data connection.

FTP ports and settings

  • Transport

    Typical value
    TCP
    What it means
    Every FTP connection runs over standard TCP/IP Ethernet
  • Control connection

    Typical value
    Port 21
    What it means
    Login and commands (list, get, put)
  • Data connection, active mode

    Typical value
    Port 20
    What it means
    The server opens the connection back to the client for each file
  • Data connection, passive mode

    Typical value
    A port the server offers
    What it means
    The client opens the data connection; easier through firewalls
  • Login

    Typical value
    User name and password
    What it means
    Set on the control; some controls also allow anonymous login
  • Address

    Typical value
    ftp://<machine-ip>
    What it means
    For example ftp://192.168.1.100
  • File types

    Typical value
    .NC, .TXT, .EIA, .MPF, .SPF
    What it means
    Depends on the control's program format

Which CNC controls have FTP

FTP depends on the control model, its software version and the options installed. Some brands use a different route for programs instead.

  • FANUC

    Network program transfer
    FTP with the Data Server or Fast Ethernet option. The standard embedded Ethernet port uses FANUC's own program transfer software instead.
  • Brother

    Network program transfer
    FTP server built into the CNC-C00 and CNC-D00 controls
  • Haas (NGC)

    Network program transfer
    Net Share, a Windows network share, plus USB. Haas doesn't document an FTP server on the control.
  • Heidenhain TNC

    Network program transfer
    LSV-2 (Heidenhain's TNCremo software) and network drives
  • Siemens SINUMERIK

    Network program transfer
    Network drives; FTP depends on version and options
  • Mitsubishi, Mazak, Okuma, Fagor, Syntec, NUM

    Network program transfer
    Model-dependent. Checked per control in the site survey.

FTP compared with FTPS, SFTP, DNC and RS-232

  • FTP

    What it is
    Plain file transfer over TCP; no encryption
    On a CNC
    The common network route for programs
  • FTPS

    What it is
    FTP with TLS encryption
    On a CNC
    Rare on controls; more common on file servers
  • SFTP

    What it is
    Secure file transfer over SSH (a different protocol from FTP)
    On a CNC
    Some newer, PC-based controls
  • DNC

    What it is
    Software that sends or streams programs to machines
    On a CNC
    Can drip-feed a program larger than the control's memory; uses Ethernet or serial
  • RS-232

    What it is
    Serial cable, one machine at a time
    On a CNC
    Older controls; slow, but still common for drip-feeding
  • Network share (SMB)

    What it is
    A Windows shared folder
    On a CNC
    Haas Net Share and some PC-based controls

Other protocols used on CNC machines

FTP moves files. Most machine data, such as status, alarms and production counts, travels over other protocols.

  • FOCAS

    Main purpose
    FANUC's own interface for machine data and programs
  • MTConnect

    Main purpose
    Open, read-only standard for machine-tool monitoring data
  • OPC UA

    Main purpose
    Open industrial standard for machine data, with security built in
  • MQTT

    Main purpose
    Lightweight messaging for sensors and IoT devices
  • HTTP / HTTPS

    Main purpose
    Web pages and web services some controls serve
  • LSV-2

    Main purpose
    Heidenhain's protocol for programs and data
  • EtherNet/IP

    Main purpose
    Industrial automation and PLC communication
  • SMB

    Main purpose
    Windows network folder sharing
  • Digital I/O

    Main purpose
    Electrical signals for machines with no network connection

FTP for machine monitoring

Most controls use FTP only for programs, and a program file tells you nothing about whether the machine is running. Some controls go further: they keep their live status, part counter, alarms and logs as files on the same FTP server and update them as the machine runs. On those controls, FTP is a full monitoring connection.

Brother CNC-C00We run this

The C00 has no OPC UA server, but it keeps its status, part counter, alarms and logs as files on its FTP server. We monitor C00 machines this way in production today. See the Brother page.

Brother CNC-D00OPC UA first

The newer D00 publishes the same data over OPC UA, which we use for live data. Its FTP server is still there for programs and the control's own log files.

  • How data is shared

    FTP
    Files the control writes
    OPC UA
    Named items the control publishes
  • History between reads

    FTP
    Yes, from the control's own log files
    OPC UA
    Depends on the control
  • Security

    FTP
    Login only; keep on the plant network
    OPC UA
    Signing, encryption, certificates
  • Where you meet it

    FTP
    Brother C00 for status; most controls for programs only
    OPC UA
    Newer controls: Brother D00, Siemens, Heidenhain and more

When a control offers both, we use OPC UA for live data and FTP for the files only FTP has. When it offers only FTP, FTP alone gives a complete picture.

Check a control's FTP with FileZilla

Before installation, your maintenance engineer can confirm FTP works with a free FTP client such as FileZilla:

  1. 1Connect a laptop to the same network as the machine (for example laptop 192.168.1.50, machine 192.168.1.100).
  2. 2In FileZilla, enter the machine's IP address as the host, the FTP user name and password set on the control, and port 21.
  3. 3Connect. If the control's folders appear, FTP is on and the login is right.
  4. 4Download a program file to be sure files transfer. Don't upload or delete anything on a production machine.

FTP security and safety on a production machine

  • Changing the machine

    How it's handled
    Monitoring only reads. Monitoring doesn't change programs, settings or how the machine runs.
  • Slowing the control

    How it's handled
    Status files are small, and reading them doesn't affect machining.
  • Your program transfers

    How it's handled
    They carry on as before, alongside monitoring.
  • No encryption

    How it's handled
    FTP stays inside the plant network. Only the gateway talks to the cloud, over one encrypted outbound connection.

Setup on the control

  1. 1Connect the control to the plant network and give it a fixed IP address.
  2. 2Set an FTP user name and password on the control.
  3. 3Allow the gateway to reach the control on port 21.
  4. 4Our team connects the gateway and checks the live data against the control's own screen.

Common FTP problems on a CNC

  • FileZilla can't connect at all

    What's happening
    FTP is switched off on the control, the IP address is wrong, or port 21 is blocked.
    What to do
    Check the control's network settings and that the laptop is on the same network.
  • Login fails

    What's happening
    The FTP user or password on the control is different, or was changed during maintenance.
    What to do
    Use the login set on the control; update it on the gateway if it changed.
  • Connects, but the file list never appears

    What's happening
    Active mode is blocked by a firewall.
    What to do
    Switch the client to passive mode.
  • The control stops answering FTP while the machine keeps running

    What's happening
    The control's FTP server has stopped accepting new connections.
    What to do
    We reconnect automatically when the control answers again. If it doesn't recover, restarting the control clears it.
  • OPC UA stops on a Brother D00 after an FTP password is set

    What's happening
    The control now asks OPC UA clients to log in too.
    What to do
    We use the same user name and password for OPC UA.

A mixed fleet is normal. FTP machines sit next to OPC UA machines, FANUC on FOCAS, and older machines on digital I/O. All of them land on the same dashboard.

Frequently asked questions

Mainly for moving NC programs over the network: sending programs from a PC or CAM system to the machine, downloading programs from the machine, and backing them up, without a USB stick or an RS-232 cable.

Only when the control keeps its live status as files on its FTP server, as Brother's CNC-C00 does. Then the files show running or stopped, program, part count and alarms. A control that uses FTP only for programs doesn't give machine status this way.

Brother Speedio machines with the CNC-C00 control, which have no OPC UA server. Other controls connect over OPC UA, FOCAS, MTConnect or digital I/O, whichever gives the most data on that machine.

Yes. Monitoring only reads, so your program transfers carry on as before. Monitoring doesn't change programs, settings or how the machine runs.

Plain FTP doesn't encrypt the login or the files, so it should stay on the plant network. That is how we use it: the gateway sits inside your plant, talks to the machines locally, and sends data out over one encrypted connection. The machines never connect to the internet.

Port 21 for the control connection (login and commands). Files travel on a separate data connection: port 20 in active mode, or a port the server offers in passive mode.

See it live

See live data from an FTP-connected machine like yours, in the demo, not after the contract.